Atag HG3011AA Manual do Utilizador

1GBINSTRUCTIONS FOR USEHG3011A

10Caution: In order to avoid a hazard this appliance must be installed according to these instructions for installation The hob unit can be mounted i

11It is not necessary to attach the reinforcement beam to the table surface, as it is held in place by a specially designed moulding, which is incorpo

12Do not install the hob above drawers.

13It is not necessary to attach the reinforcement beam to the work top surface, as it is held in place by a specially designed moulding, which is inco

14Gas installationIn accordance with local requirements for domestic gas cooking appliances.Gas installation must only be carried out by an authorised

15N L1240 V1N + PEHO5V2V2-FYellow/Green: 61 mm +/- 3 mmBlue and brown: 51 mm +/- 3 mmType of gasAdjusted to natural gas:G20 - 20 mbar - G25 - 25

16ServiceIf the hob is not working correctly, please carry out the following checks before contacting your local ATAG Service Centre.IMPORTANT: If you

17GuaranteePlease refer to the accompanying guarantee booklet and guarantee card for guarantee conditions.

18Important AdviceThis appliance has been constructed to ensure safety. However, repairs performed by non-specialists could impair the safety of the a

19

2Congratulations from ATAGDear Customer,Congratulations with your new Hob.It is important that you become familiar with the functions and features of

20325 88-9162 Rev. 1-320Postbus 1033. 6920 BA Duiven. Nederland

3Contents Page noFor the userYour new aplliance ... 2Safety inform

4Safety informationThese warnings are provided in the interests of your safety. Ensure you fully understand them before installing or using the applia

5Description of the productBurnerControl knob

6Burner markingsSymbols at each control knob indicates which burner is adjusted with the control knob.Front BurnerBack burnerPanel markingsEach contro

7Hulpgasring / branderdekselIn de door de branderkelk samen met de branderdeksel en hulpgasring gevormde ruimte vindt de vermenging van gas en lucht

81. Depress and turn the control knob for the burner to the left to max. flame . (Ignition position) 2. The ignition electrode will emit

9Maintenance and cleaningStainless steel surfacesPerform daily cleaning with a slightly damp cloth. For more severe soiling, use a liquid cream. Alw